Showing posts with label larger mugs. Show all posts
Showing posts with label larger mugs. Show all posts

Thursday, April 28, 2011

Pottery Photos from 4/27/2011



Another special order Sake set...

The mug with an almost all-over glaze is a special order.

Wednesday, April 27, 2011

Preparing for Clayton

Life has been hectic lately.  I was off cat-sitting & house sitting for 2 weeks at the beginning of this month, back home for about a week, and then another week dog & house sitting.  Add to the mix that I work full time in our family business, and I have been preparing to go to my Spring show, and trying to get the special orders completed.  When I am not home, it is hard to do.
I have my final glaze firing for the week going in today... photos tomorrow, leave Friday.
With the power cord to my laptop dead, I cannot get it to re-charge, so I was without for the last month.

Monday, January 10, 2011

My Snow Day

I have lived in the South for over 11 years now, and although I feel I can most probably still drive in Northern snows OK, I prefer not to drive much in the snow down here.  That is for a number of reasons, #1 being that there is seldom enough snow to warrant the purchase of the big plows and sanding trucks like up North. #2 a large number of native Southerners are not accustomed to driving in the snowy conditions.  #3 if I don't have to go out in it, then I won't!  Nothing is open anyway! Because #4 they can't plow and sand the roads as well... because of #1...

 
As I walked out to clean off my car at 8 AM
 A few photos of the wintry wonderland in our yard...

A look at Dad's car before it was cleaned off...

The pots on the potting table, partially under the eaves...
 Then, what to do with an extra day off from work... play with clay!  
I have been having some technical difficulties with the handles on the large mug.  I re-worked the mold and hopefully they will stop cracking on me!
mugs!
 I was able to get a few more rounds of pouring done today... concentrating mainly on mugs, my orders are waiting, and my supply is in need of replenishing...
studio clutter!
Who knows what the weather has in store for us tonight... hopefully, we will miss out on the freezing rain and sleet... schools are closed again tomorrow... not sure if we'll be open yet, depends on the road conditions...

Friday, November 19, 2010

Suggestions anyone?

As I have been working on getting large mugs made for the people that have ordered them, as well as mugs for other orders, I have been thinking.  (I know, I better be careful, thinking can be dangerous!)

I would like to offer a little more diversity in my product.  I will keep the current items, and I will pull out some of my Victorian Hands that are just waiting to be fired, but I am looking for an idea of where to go next?


Another look at my booth at Mistletoe Market 2010
I have thought of several different things... a nice vase or two, a teapot (shorter and rounder than the coffee pot), I'd love to do plates (but haven't had too much luck with them in the past), beads, pendants, buttons, spoon rests, the list goes on (and on).  But I would like input from all of you out there as to what you think would be a good thing for me to add.

All suggestions are welcome, I value your opinions.

Thanks for stopping by my blog, and thank you in advance for your suggestions!

Sunday, October 31, 2010

Keeping busy...

It has been a busy month.  

Mom has had some rough patches in her chemo treatments, including an adverse reaction to an antibiotic when she had a sinus infection.  This left her pretty sick for a while.  But, she rallied and was feeling better when my sister Regina and her family, plus my sister Sue came for a weeks visit.  She went into work for the first time all month just yesterday.  Today she is feeling a bit tired, as is natural for the 3rd day after chemo.  But she is definitely stronger than she was after that sinus infection/antibiotic reaction!

Classes at The Mercantile have been hopping!  That is a GOOD thing!  We have a total of 11 wonderful ladies taking classes through Osher Lifelong Learning Institute at Clemson each week.  They just completed week 2 and have 3 more to go!  And our regular class schedule at the store is also quite full.

I am in the throes of getting ready for my last show of 2010... The Mistletoe Market at the Anderson County Museum... this coming Friday and Saturday!  Casting, trimming, bisque-ing, sanding, glazing, firing...   I have a bisque firing and a glaze firing yet to do before Friday.

I hope you all have had a good October, and that November will be even better!

Somebody I know turns 50 in November...

ME!

Sunday, September 12, 2010

The Large Mug - again!

I don't have much to write about this morning.  

All is going well with production of the large mug.  

I have not been able to get to the PO to ship out some things promised to people (wedding gift, prize, necklace...) because when I have the time, the PO is CLOSED!

I took this shot on Monday before Kathy picked up the FIRST first quality large mug to be finished!

As you can see, the wooden model is to the left, and the original mug is to the right.

Kathy was so pleased!  And that makes me feel good too!  I have the rest of them in production now for those who have been promised one or more.  The glaze on Kathy's seems to be the glaze of choice... ALL 6 that I need to make are the same color!

Well, back to production... I have to go consult this afternoon about my next dog/cat sitting job that starts Tuesday...

Sunday, August 29, 2010

Thursday, August 26, 2010

TA DA! The Larger Mug!

Bisqued mugs with glaze Plum and Surf






This morning I loaded up the kiln (well... really only one shelf of it).  I was so excited to finally have finished larger mugs!




First peek!



So... I loaded it up and fired it off before I went into work.  Past experience has proven that this clay body can handle quick firing VERY well.





After work, I went out to the shed and checked to see that the kiln sitter actually did turn it off properly, and it was no longer glowing.  So, I propped the lid open about an inch.  And I went back into the house for dinner.




It was soooooo hard to wait, but wait I did, I gave it til the end of dinner, and then took this first peek photo before closing the lid onto the prop at about 3 inches to cool some more.  Then I checked the quick photo and saw no obvious signs of cracks or excessive warpage.  That is a good thing!


I then waited about an hour for it to cool enough to unload with the kevlar gloves... 

the finished mugs!


It was worth the wait!  The mugs are GORGEOUS, if I say so myself!





In this photo (sorry about the color being so off), I put one of the smaller mugs (a second) to compare the sizes, yet again...




The new mug is a TINY bit (1/8") larger than I had planned, but that is fine with me!  It holds 1 7/8 cups per dinnerware industry standards (to the rim) compared to a cup for the original mug,

I must say, as long as people have been asking for this new mug, I am so glad it is finally here!

My thanks go to a number of people, mainly my brother Bill for getting the beautiful model made for me after my sitting on the drawings for so many years.  My friend Mike needs thanks for helping me get the coddles made quicker than I could have done them by myself (and for pushing me extra hard to get back to making my pottery 5 years ago...).  I also need to thank my ex-husband Verne and my father-in-law Wally for all they taught me about model & mold making and the ceramic industry, without your teaching me, I could not do what I do.  My parents need to be thanked as well for their moral support in my creative process, and giving me a place to live and to create.  All of my friends and family get thanks as well for their support, suggestions and encouragement.  And my customers need thanks too, for liking my work and buying it!

Tuesday, August 24, 2010

Successful Bisque Firing!

This morning I loaded just the large mugs that were dry enough into the kiln for a bisque firing.

6 large mugs ready to bisque to cone 04!
 I started the firing at about 8:15 or so and then went off to work... When I returned home, I unloaded the kiln after dinner.  Of course, they were still a bit toasty (needed kevlar gloves to unload the kiln) but they cooled pretty quickly.

5 large mugs sanded...
Unfortunately, I had not made much in a few months and I forgot I was nearly out of 400 grit wet/dry sand paper... and I could only sand 5 of the 6 mugs before the paper was too worn out to do any good.  (Need to pick some more up tomorrow!)

large mug and small mug with ruler for comparison
Here is a photo comparing the bisqued mugs in both sizes.

As I sanded them, I was able to detect that the firing was a total success!  None of them cracked!

large mug & small mug bisqued, small mug glaze fired
This photo shows the comparison of the small mug bisqued and then glaze fired... When the large mug shrinks in the glaze firing, it should end up approximately the size that the small mug is when it is bisqued...

(Those bisqued mugs really are straight, the towel under them tilted them a bit to the left...)

the return of the parsley!

And lastly, just to show that the parsley really is doing well, a photo I took of it on Sunday morning... soon we'll be able to enjoy it again!

Wednesday, August 18, 2010

Comparison #2

SUCCESS!

I cast the first of my Larger Mugs last night!  Being the first pour of a new mold, it was slow in releasing... so, I let it sit overnight (OK to do since there are no undercuts to hang-up during shrinkage)... 

When I woke up this morning (at 5:15!) I was not clear-headed enough to feel like I should be handling the mug... so, I waited patiently (ie - caught up on my blog reading) and opened it about 6:30 when I was feeling a bit more clear-headed and steady.

First pouring of Larger Mug!
I am soooooooooo pleased with the results!  The 2nd pouring is draining as I type and may be able to be released from the mold before I go into work this morning... if not, that's OK, it can wait until I get home this afternoon (not sure if I can wait that long though!) [** UPDATE - I was able to release it before 8 AM, and a THIRD one is draining right now!**]

As I was photographing the new mug, I noticed a dry mug in the background that it's handle broke, so, to compare the two at this stage is close to the final difference in size.  The amount of shrinkage in the drying is minimal, compared to the final firing.

The handle-less Original Mug (dry) with the Larger Mug (leather hard)





So... a side-by-side comparison... WOW... I am EXCITED!  Can you tell???






A top view... color is off... but it works...







This is 20 years in the works... the excitement I feel is hard to describe!  To actually see it in clay... that drives it home to me.  The wooden model was great, to see in 3-D finally, but in clay brings it to an altogether different level for me!




In my bog reading this morning, I concentrated on clay blogs... well, clay bead blogs... I have been trying to get some clay beads and pendants and buttons made, now that my clay muse has returned, and is in a productive mode... maybe I can get some of those done as well... WHILE filling the requests I have already on my list!  Starting tonight, I will add a status line at the top like my friend Kelley does, that way everyone will know where they stand.  Why not now, you ask... because I have clay to attend to, that's why!

Wishing you all a fabulous day filled with wonderful things...

And sending purrs to Kelley on the new addition to her family... can't wait to see pictures!

Tuesday, August 17, 2010

A little comparison...

Just to let you know the difference in sizing for the mugs...  My original mug, if I don't cast it too thick, holds 8 oz. per the dinnerware industry standards (to the rim).  The new mug is about 18% larger.  Why 18% you ask???  Well, because the porcelain shrinks so much (18%) I was asking a few people over the years how large they'd like the mug.  I showed them the mold for the original mug.  They liked the size it starts out as the finished size.  Wha-la!  That is how I decided to make the larger mug 18% larger.  How much it will hold is an unknown at the moment.  (I should be able to start casting them tonight after work!  YAY!!!)


Original side-by-side with Large...

And, a photo of my nephew DragonBen taken yesterday, his last day of summer vacation before starting 5th grade!


What a face!

Monday, August 16, 2010

And the Winner Is...

56 entries

mix them up well...

WINNER!
 I want to thank all 29 people who entered for a total of 56 entries in my August Giveaway.  I have found some fun new blogs to follow in the process!




I wanted to do this drawing as early as possible... I had the names written last night and in the fabric bowl, waiting to see if any new entries would join them this morning... none did








So, I drew the name of the winner of the August Giveaway - ledamewood!




Then, feeling a bit celebratory over finishing the mold set for the Larger Mug... I decided on the spur of the moment to do a second drawing from the same group... to be added to the list to receive a new Larger Mug when they are ready...


Mix them up again for a 2nd SURPRISE drawing...

2nd WINNER!
And Carol Dean of Sand Fibers is the winner of my SURPRISE 2nd DRAWING!

Congratulations to both of you - I will be sending emails to you in just a few minutes (as soon as this is posted).

My apologies to my niece Karen who really wanted to win this... but she knows where to get a necklace and mug made by me anyway... I love you Karen!

Sunday, August 15, 2010

The Larger Handle Mold is FINISHED too!!

This handle needed to be about an inch longer than the handle on my original mug.   Otherwise it might not be balanced when the mug is filled with the beverage of choice...  Not wanting to deal with the fragility of carving a new handle, out of plaster, from scratch, I press molded a handle in the smaller mold, then press molded a smaller section and spliced them together.  I used my modeling clay for this process.
The model set up to pour the waste mold
The waste mold with modeling clay keys added


Once I had the waste mold made, and added some modeling clay keys, I was able to set up the coddles and cast the first side of the working mold.










ready to pour!




Then, I had to wait for the modeling clay to cool off after casting the first half of the mold.  The heat from the curing of the plaster caused the model to deform when I removed the waste mold... So we went out to eat for Dad's birthday...

Not too bad... needed a little more work before casting the second part of the mold...













Ready to pour part 2!

this is what the poured side looks like while it is curing!  Almost like watching paint dry...




















Waiting to see what the mold looks like... patience!  I don't want to open the mold too quickly, the plaster might not be hard enough... breathe!






When I finally opened it, I noticed some air pockets inside... but they are patchable... and I just want to get a few mugs out of this to see how they work...

OK - it isn't a pretty mold... but it'll work!

















Then I strapped it all together and put in in front of the fan to dry... With all of the humidity, I don't know if I'll be able to cast tomorrow evening or not... time will tell...
The set of molds for the larger mug!

And here is a photo of Dad's gift all wrapped this morning...  (A little bit of color to the post, plaster is kind-of boring looking...)